Traffic Lights Towable Package
Light head stows above draw bar for protection of lights during transport and to reduce travel height.
Applications
| · Roadworks | · Site | · Security |
| · Events | · Civil works | · Residential areas |
| · Film productions |
Main Features
| · Solar Powered | · Remote Programming |
| · High visibility LED lamps | · Trailer mounted & registered |
| · Default system auto reverts to flashing yellow if radio link lost | · Adjustable timing to suit specific site requirements |
Required Transport and Safety Equipment Legends:
You will need to get this item delivered A light truck or suitable ute is required
Suitable protective clothing is required
Relevant Authority and Installation Requirements
Temporary Barriers, will they be selected, installed in accordance with the Manual of Uniform Traffic Control Devices (MUTCD) Part 3: Traffic control for works on roads November 2019 and Supplement:
Type-2 Portable Traffic Signal Systems
A Type-2 PTSS has the following features:
- three modes of operation − manual
- fixed time
- vehicle-actuated
- adjustable time settings
- minimum battery life of seven days without recharging.
During manual operation, the Traffic Controller controls the sequence and time for which the green signals are displayed. The Traffic Controller cannot override the configured minimum green time and all-red time after initial configuration and operation has commenced.
Two Type-2 PTSUs shall be used for gating control on a two-lane one-way road (refer to Clause 4.3).
Vehicle-actuated mode shall be used when operating unattended shuttle control, except if the vehicle detectors fail.
A Type-2 PTSS can operate unattended. When operating unattended, a Type-2 PTSS shall be inspected at least once every 24 hours to confirm its correct operation or shall have remote error monitoring and reporting functionality.
When unattended, the contractor’s after hours contact details shall be displayed prominently on all PTSUs.